We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Recovery actual machine test.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Recovery actual machine test - List of Manufacturers, Suppliers, Companies and Products

Recovery actual machine test Product List

1～4 item / All 4 items

Displayed results
Super hard rotary grinding sludge recovery practical test

Super hard rotary grinding sludge recovery practical test

Recovery of super hard grinding sludge (rare metals) is possible! This has led to cost reduction.

We conducted a practical test using the sludge recovery device "M1-250M" to improve issues such as line stoppage during sludge recovery and inefficiencies in manual labor. Both the recovery time and quantity have been significantly improved, and it has become possible to recover ultra-hard grinding sludge (rare metals) without stopping the operating line, leading to cost reductions. Regarding the recovery of ultra-hard metal grinding sludge (rare metals), this product has made it possible to dewater along with sludge recovery. 【Specifications of the M1-250M Standard Unit】 ■ Power used: Air only, operating at 0.3MPa to 0.4MPa ■ Maximum processing capacity: 80L/min to 90L/min (due to variations in air flow) ■ Sludge recovery capacity: Approximately 10kg ■ Total weight of the device: Approximately 63kg *For more details, please refer to the PDF document or feel free to contact us.

  • Oil-water separator
  • Water treatment equipment
  • Wastewater/wastewater treatment equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Aluminum sludge recovery practical test

Aluminum sludge recovery practical test

Introducing the test conducted for sludge recovery in the clean tank under the cyclone unit!

Many users utilize cyclone machines for the recovery of sludge generated during aluminum cutting. While these machines can handle large flow rates, most aluminum, fine powders, grinding (including grinding wheels), carbide polishing, and micro-particles with minimal specific gravity are largely mixed, resulting in a limited amount of recoverable sludge. As a result, the clean tank at the bottom of the cyclone machine, which should collect the cleaned cutting oil, is often not sufficiently cleaned, and a significant amount of sludge remains. To address this issue, we used our sludge recovery device "M1-250M" to recover sludge from the clean tank at the bottom of the cyclone machine. [Overview (Partial)] ■ Implementation Location: Clean tank at the bottom of the cyclone machine (approximately 500L) ■ Sludge Classification: Aluminum ■ Recovery Device: M1-250M (Maximum processing flow rate 80L/min to 90L/min) ■ Recovery Time: 3 minutes x 5 times, totaling approximately 15 minutes *For more details, please refer to the PDF document or feel free to contact us.

  • Oil-water separator
  • Water treatment equipment
  • Wastewater/wastewater treatment equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Metal grinding sludge recovery practical test

Metal grinding sludge recovery practical test

The sludge recovery amount has greatly improved! It has become possible to extend the life of cutting oil.

At a major engine machining company, approximately 2 tons of metal sludge, including grinding wheels generated during grinding operations, mix with cutting oil, leading to the disposal of 6,000 liters of cutting oil three times a year. Additionally, due to insufficient dewatering of the sludge during disposal, disposal costs were higher than necessary. To solve this problem, a practical test was conducted using the sludge recovery device "M1-250M," resulting in a significant improvement in sludge recovery and ultimately enabling the long life of the cutting oil. 【Overview】 ■ Test date: December 28, 2008, for 3 days ■ Location: Major engine machining factory ■ Test equipment: M1-250M (MAX 90L/min) x 4 units ■ Amount of cutting oil: Approximately 6,000L (6 tons) ■ Cutting oil used: From a certain cutting oil manufacturer ■ Amount of recovered sludge: Approximately 2.5 tons *For more details, please refer to the PDF document or feel free to contact us.

  • Oil-water separator
  • Water treatment equipment
  • Wastewater/wastewater treatment equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Actual machine test for sludge recovery generated during heat treatment processing.

Actual machine test for sludge recovery generated during heat treatment processing.

We will introduce a practical test where the black, opaque sample showed improved transparency after processing!

At an automotive parts processing company, chemical treatment is conducted at a high temperature of 190°C during the gear hardening process. Using a filter press machine, black fine sludge particles under 100μ are recovered from the chemical liquid, but the nightly tasks of attaching and detaching the filter and cleaning it are labor-intensive and costly. As a result of conducting a practical test with the sludge recovery device "M1-250M," the recovery and dewatering time was reduced to one-fourth of the conventional method, while filter cleaning time was reduced to one-fifth, and labor costs were halved, leading to significant cost reductions. 【Overview】 ■ Amount of chemical liquid with sludge contamination: Approximately 120L ■ Classification: Fine black sludge under 100μ ■ Recovery device used: M1-250M standard unit ■ Sludge recovery time: Approximately 10 minutes ■ Sludge dewatering time: Approximately 30 minutes ■ Sludge recovery capacity: Approximately 3.7kg ■ Condition after treatment of chemical liquid: Improved transparency *For more details, please refer to the PDF document or feel free to contact us.

  • Oil-water separator
  • Water treatment equipment
  • Wastewater/wastewater treatment equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.